• 1 x Grindmaster 2000 Surface Graining Machine - 900mm bed capacity
• 1 x Vixen Jetair Shotblast Machine

Linishing & Polishing

• 5 x Vanco Bench Linishing Machine
• 2 x 4BM Bench Linishing Machine
• 1 x D-Bur-R 121-E Edge Bevelling Machine
• 1 x Acton Vibrota Vibratory Drying Machine - 12 cu/ft capacity
• 1 x Canning Drying Out Barrel Machine

Rumbling

• 1 x Acton BV10S Vibratory Rumbling Machine - 10 cu/ft capacity
• 1 x Invicta Vibratory Rumbling Machine With In-Line Dryer
• 1 x Burr Bench Vibratory Rumbling Machine
• 1 x Walter Trowal Through Vibratory Rumbling Machine

Cleaning

• 1 x Midi MecWash 400 Aqueous Cleaning System
• Max component size 400mm x 470mm x 600mm @ 100kg

Pre-treatment

• 1 x Ercon In-line pass through 2 ½ stage zinc phosphate pre-treatment plant

Powder Coating

• 1 x Ercon powder coating plant with over head pass through conveyor including double sided - spray booth with full integral extraction and spray to waste facility allowing rapid colour change
• 2 x Gaymer cartridge manual spray systems with integral full powder recovery system
• 1 x Ercon single pass through gas convection drying over following pre-treatment
• 1 x Ercon single pass through gas convection curing oven following powder coat
• 1 x Overhead conveyor loop system with carrying capacity of 30 kg on 305mm pitch
• 2000mm x 1250mm x 650mm maximum individual component size

Screen Printing

• 1 x Manual Silk Screening Bed - max screen frame size 500mm x 650mm
• 1 x Kippax Manual Silk Screening Bed - max screen frame size 400mm x 650mm
• 1 x Cugher MS300 Automatic Silk Screening Bed - max screen frame size 800mm x 400mm

Additional Finishing Available

The undertaking of anodising, plating and other finishing processes is through approved suppliers.

<< Go Back